The CAT II Q (Quick)
to aid in foreskin restoration
The most advanced method of it's type, yet, the least expensive!
Introducing the CAT II Q tapeless bi-directional, stretcher for foreskin restoration.
The CAT II Q is very much like the earlier CATs, however the tensioning mechanism is much faster and there is an option of selecting different length tensioning rods and different pushers. There is no good reason to have an extra long rod in-place, if you don't need it.
The CAT II Q works on the principle of push/pull or dual tension for foreskin restoration.
The advantages of the tapeless CAT II Q for foreskin restoration are, of course the tape expense and hassle. In addition, the CAT II Q can be totally removed in a second and reinstalled in probably 30 seconds. The CAT II tension adjustments can be made easily and the weight remains at less than 2 ounces. Keeping in mind that the CAT II is designed to be a "daily wear tensioner", another feature, is the optional ring on the end of the tensioner to make a tugger. The advantage of this over most tuggers, is with the CAT, the tension can be increased for inner tension, while at the same time tugging. The outer silicone cone, by itself, can double as a night time retainer. After getting used to the CAT, you'll forget it's there.
I've constructed the CAT to be as compact, as comfortable, as safe and as easy to adjust, as possible. It can be extended about 3" - 4.5" from the compressed point. Before you order, make sure of the correct size needed. The diameter of the regular CAT II Q is 1-3/8", the smaller CAT II Q (special order) is 1" diameter. The best way to determine your needs, is to place a cylinder, of the same diameter, on top of the glans and see, if the skin tube will roll over it. Also, don't order the smaller CAT, if your measurements indicate the regular CAT. Also, keep in mind, that you'll need enough loose skin roll onto the puller by about 3/8" minimum.
To order the 1" version of the CAT II Q, you can email me beforehand, but also, "make note of your preference" during checkout, on the PayPal information form, "note to seller".
The CAT II Q is made of HDPE plastics materials, with the outer cone being silicone. It can be removed in a second and is no big deal to re-install, therefore, removing it for urination is simple. The rod to pusher attachment, now is made up of a small aluminum rivet, captivated by a piece of waterproof vinyl tape. This change, while "greener", will make it easier to change rods and pushers. If the tape were to fail over time, any waterproof vinyl tape could be used to replace it.
CAT II Q
Buy the CAT II Q or parts direct, by "adding to your cart" below!
To get more information, email me.
If you are student and have a .edu or other college associated email address, or you are a Veteran with proof of service, write to me for further discounts.